24 amazing years with the Peregrine.
Yanmar 3GM30F - 2357.7 engine hours - 01/01/2025
January
- Oil/filter replaced
- Bilge pump replaced (have 1 new spare pump)
March
- Fresh water tanks cleaned, water filters replaced
June
- Added Starlink mounting post
- Added 5 slot fuse box to solar powered distribution system
- Wired in Starlink and cockpit USB
- Replaced stern running light (calibrated to 135 deg)
- Replaced both engine and gear oil in Honda 5hp. Dipstick check: do NOT screw it in!
August
- Diver (Eli 508.627.1964) replaced zincs, scrubbed hull. Prop Coat working extremely well. Some hard growth.
- Replaced Yanmar transmission dipstick
- Canvas connector panel restitched
- Bristol Marine (360.297.7626) inspected Honda 5hp outboard for minor oil leak. Estimate $500 to fix, but not worth repairing. Check oil regularly. Dipstick inserted but not screwed in.
- Replaced first stage water filter
September
- Condition and Valuation Survey
October
- New shore power receptacle and 10awg 3 wire to breaker box
- Replace chimney section to remove damper
- Steering quadrant stopper installed
- Replaced hose clamps on the rudder packing gland
- Replaced bilge pump hose
- Separarated propane and electrical runs. Electrical conductors were placed inside protective wire wrap. Both electrical and propane lines were hung from individual wire support clamps.
2018 (and earlier) maintenance »
